Why Are There Two Drain Plugs On Homelite UV80522? Details and Facts

Why Are There Two Drain Plugs On Homelite UV80522? Two drain plugs are included in the features of Homelite UV80522 which makes it easier for the equipment to function smoothly or simply drains all the fluid, water, or oil—even the residual fluids.

Why Are There Two Drain Plugs On Homelite UV8052?

Homelite UV80522 is famous for its superior functionality and unique design. But the question of two drain plugs is often asked.

 This is out door equipment which is made for better cleaning. Be it any type of fluid, like water, oil, etc can be cleaned very efficiently. its two plugs are made for this purpose so that it gives better performance and increases the life of the machine.

Why Are Dual Drain Plugs?

Primary Drain Plug Purposes

You need to know that ”Why Are There Two Drain Plugs On Homelite UV80522? what is the purpose behind this.The primary plug is for routine cleanliness. The primary plug and secondary plug are separate. The primary drain plug is located near the primary chamber.

The primary drain plug is used to drain the old oil so that the engine oil can be removed better and changed adequately. This improves the performance of the engine and improves life.

Benefits

• It is very easy to use, it is a great and simple equipment for regular maintenance.
• Old engine oil, which is about to get spoilt and is useless, is replaced with fresh oil. It is removed very cleanly so that there is space for fresh oil.
• It gives better performance because of having two plugs. Because with two plugs, better maintenance of both engine and Homelite UV80522 can be done. This is important for its better performance and long life.

Secondary Drain Plug purposes

This is different from the primary drain plug. It is situated in a secondary chamber. The main fluid is removed through the primary plug, but the fluid that remains in the corners and is in minimal quantity cannot be removed with the primary plug, so a secondary plug is used.

How To Use Dual Drain Plugs

1. Oil change preparation: for this, it is important to keep a handy tool like a ranch with you to remove the plugs. Secondly, keep fresh oil with you, and you will put the old oil in a separate pot also put that with you.
2. Warm up the engine; before draining the oil, run the engine till the oil becomes hot. Then turn off the engine and leave it for a while till it cools down a bit.
3. Use primary plug; Place the pan below the primary plug and loosen the plug with a wrench. Drain all the residual oil.
4. Use the secondary plug; for this purpose place the pan below the secondary plug and loosen the plug with a wrench. Drain all the residual oil.
5. New oil; To refill with new oil, make proper measurements and refill with oil. It is better to follow the instructions of Homelite UV80522 for better results.
6. Final inspection; Tighten all the plugs again, give final touches and Check to see if there is any leakage.

Issues and Troubleshooting

1. Leakage; If oil is leaking it means either the gasket is damaged or the tie is not closed. For this reason it is important that you close it properly and replace it if there is any damage.

1. If the drainage is not complete, after using the primary plug, use the secondary plug necessarily; otherwise, the drainage will not be complete, and this old and dirty oil should be mixed with fresh oil. This will create a problem and affect the engine’s performance and life.
2. The problem with removing plugs: Sometimes the plug is closed very tightly. For this, it is better to clean the area of ​​the plug and not apply too much force; otherwise, the plugs will be damaged. It can happen. And for this, use the proper tools.

Maintenance Tips

• Change the oil as per the instructions.
• Use the recommended oil.
• Keep the surrounding areas of the plugs clean so that no dust will gets inside.
• Inspect the plugs. Tighten them properly and replace them if damaged.

FAQs

Conclusion

A common question asked by people who use it is why the Homelite UV80522 features two drain plugs? This is so that there can be better cleanliness and no old or dirty oil remains. Because if old oil remains then the performance of fresh oil gets affected. 

This will deteriorate the engine’s performance and longevity. That is why the primary plug is for major cleanliness, and the secondary plug is for residual cleanliness. If there is oil leakage or the gasket is not tight, then tighten it. Or if it is damaged, then replace it. Also, keep the surrounding area of the plug clean.

Please visit socialityhouse.us for more exciting stories.